UnlimitedPocket

Mastering Long Exposure Photography: Formulas, ND Filters & Camera Settings

🛠️ Free toolND Filter Exposure CalculatorSkip the math in the field: enter your base shutter speed and ND filter in the ND filter calculator to get the exact long exposure time. Open tool →

Long exposures turn rushing water into silk, crowds into ghosts and clouds into streaks. The technique relies on one idea: keeping the shutter open longer while controlling how much light reaches the sensor. Neutral density (ND) filters make that possible in daylight.

Understanding stops

Each stop of light is a doubling or halving. Going from 1/125 s to 1/60 s doubles the light (one stop). ND filters are rated in stops of light they block.

FilterStopsLight reduction
ND8 (0.9)31/8
ND64 (1.8)61/64
ND1000 (3.0)~101/1000

The long exposure formula

New shutter speed = base shutter speed × 2stops

Metered at 1/60 s, adding a 10-stop filter: 1/60 × 1024 ≈ 17 seconds. With a 6-stop filter: 1/60 × 64 ≈ 1 second. The ND filter calculator handles any combination.

Step-by-step workflow

  1. Mount the camera on a sturdy tripod; turn off image stabilization.
  2. Compose and focus before adding a dark filter, then switch to manual focus.
  3. Meter without the filter in manual mode (low ISO, f/8–f/11).
  4. Calculate the new shutter speed; use Bulb mode with a remote for exposures over 30 s.
  5. Cover the viewfinder to prevent light leaks; shoot and check the histogram.

Want the most depth of field? Check it with the depth of field calculator.

Night skies: the 500 rule

For pin-sharp stars without trails, a popular starting point is:

Max exposure (s) = 500 ÷ (focal length × crop factor)

A 20 mm lens on full frame: 500 ÷ 20 = 25 s. High-resolution sensors may need shorter times. Use the 500 rule calculator.

Ideas and tips

Graduated vs. solid ND filters

Solid ND filters darken the whole frame evenly and are used for long exposures. Graduated ND filters darken only part of the frame – usually a bright sky – to balance exposure with a darker foreground. Many landscape photographers carry both.

Dealing with color casts and noise

  • Strong ND filters can add a slight color tint; shoot RAW and correct white balance later.
  • Very long exposures can increase sensor noise and hot pixels. Long-exposure noise reduction helps but doubles the wait time.
  • Check the edges of the frame for vignetting with stacked filters on wide lenses.

Reciprocity for film shooters

Film doesn’t respond linearly to very long exposures – an effect called reciprocity failure – so exposures often need extra time beyond the formula. Check your film’s data sheet for its specific correction table.

ND filter exposure chart

Base shutter+3 stops (ND8)+6 stops (ND64)+10 stops (ND1000)
1/500 s1/60 s1/8 s2 s
1/125 s1/15 s1/2 s8 s
1/60 s1/8 s1 s17 s
1/15 s1/2 s4 s68 s

Values are rounded to the nearest common shutter speed.

Long exposure checklist

  • ☐ Sturdy tripod, legs extended thickest-first
  • ☐ Remote release or 2-second timer
  • ☐ RAW format, low ISO
  • ☐ Manual focus locked
  • ☐ Viewfinder covered
  • ☐ Spare batteries – long exposures and cold weather drain them fast
  • ☐ Lens cloth for spray and condensation

Long exposure glossary

TermMeaning
StopA doubling or halving of light.
ND filterNeutral density filter that reduces light without changing color (ideally).
Bulb modeShutter stays open as long as the release is held or locked.
VignettingDarkened corners, sometimes caused by stacked filters.
Optical densityFilter rating such as 0.9 (3 stops) or 3.0 (10 stops).

Frequently asked questions

How do I calculate shutter speed with an ND filter?

Multiply your metered shutter speed by 2 raised to the number of stops. A 10-stop filter turns 1/60 s into about 17 seconds.

What ND filter is best for long exposures?

A 6-stop filter is versatile for water, while a 10-stop filter allows minute-long exposures in daylight.

What is the 500 rule?

A guideline for star photography: divide 500 by your effective focal length to get the longest exposure before stars start to trail.

Should I turn off image stabilization on a tripod?

Generally yes – many lenses recommend turning it off on a tripod to avoid blur.

Free printable PDFShoot Day Gear ChecklistPrint a free shoot-day gear checklist so you never forget your tripod or filters. Print free →

Related tools

All Photography →

More guides

All guides →